Premier Mounts TS72B-MS2 Installation Manual download pdf (Page 5)

PSD-TS

Installation Manual Page 5

Support Pole Installation

Remove the stand out of the box and check for all proper

hardware, if missing any hardware please call Premier Mounts.

A PSM or CTM series mount is required to complete

the PSD-TS system. Refer to the installation

instructions to install the mounting bracket.

1. Insert the poles inside the base columns of the PSD-TS,

making sure they are fully seated on the base with the

cable access holes facing the rear of the base.

2. Secure the poles with four (4) M8 x 10mm socket

head screws and tighten them using the Allen wrench

(supplied).

3. Do not over tighten the screws.

Adapter Installation

1. Install the PSD-SPA (mount adapter) over the top of the

poles and secure it at the desired height with the four (4)

M8 x 10 Allen screws (supplied).

2. Use the Allen wrench (supplied) to secure the adapter to the

poles.

Installing the Back Plate

The back plate will vary depending on the system

ordered. There are two (2) different systems for this

stand: the PSM series and the CTM series.

Arrow must be pointing up prior to installation.

Secure the following plates to the secured

PSD-SPA on the tubes.

1. For the PSM-Series, secure the back plate to the four (4)

threaded mounting points found on the PSD-SPA with the

four (4) M10 x 12 bolts and flat washers (supplied).

2. For the CTM-Series, secure the back plate to the four (4)

threaded mounting points found on the PSD-SPA with the

four (4) M10 x 12 bolts and flat washers (supplied).

2” Support

Poles

PSD-TS

Collared

Mounting

Columns

Allen Wrench

M8 x 10mm

Hex screws

PSD-SPA

Ada

2” Support

Poles

CTM Back

Plate

M10 x 12mm

Hex Head Bolts

Flat Washers

Back Plate

PSD-SPA

Adapter

Allen

Wrench

M8 x 10mm

Hex screws

Directional

Arrow

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Premier Mounts TS72B-MS2 Installation Manual Page 5

Comments to this Manuals

Related products and manuals for Flat panel floor stands Premier Mounts TS72B-MS2