Premier-mounts PP-FCMA User Manual download pdf

Installation Instructions

PP-FCMA

Step 1

Carefully remove a 24”(610mm)x48”(1120mm) or two 24”(610mm)x24”(610mm) suspended ceiling tiles.

Step 2

Install the four (4) each ¼”x3” eye bolts securely into the permanent ceiling structure with a minimum separation of

18”x18” square pattern between eye bolts. Cut four (4) required lengths of the safety suspension support wire supplied.

Run one end of the wire through the eye bolt twist minimum eight (8) times and leave a 6” tang for each eye bolt.

Step 3

Install the PP-FCMA plate securely into the “T” bar frame work with the mounting studs face down and the dual knock

out for electrical box located at the rear of the projector position. Install the additional 24” “T” bar main run cross lots

if needed to support the adapter plate and replacement 24”x 24” ceiling tile.

9530-301-001-01

1 2

Installation Instructions PP-FCMA Step 1 Carefully remove a 24”(610mm)x48”(1120mm) or two 24”(610mm)x24”(610mm) suspended ceiling ti

Page 2

Step 4 Install the four (4) each step bolt into the holes of the adapter plate and secure with the ¼” kep nuts supplied. Install the four (4) ea

No comments

Premier-mounts PP-FCMA User Manual